Nominal voltage | |
---|---|
Specific value | 24 VDC |
Limit values, min/max | 11/27 VDC |
Nominal current, typically | |
Specific value | 100 mA |
Condition | unloaded |
Supply | |
Optional | 5 VDC ± 5 % |
Signal form | Square |
Incremental signals, square | |
Channels | K1+, K1-, K2+, K2- |
Phase position, electrically | 90 ° |
Phase position, electrically | K2 lagging to K1 |
Rotational direction | CCW |
Direction of view | Flange connection |
Zero pulse, square | |
Channel (Channels) | K0+, K0-, optional |
Number of revolutions | 1x |
Impulses, square wave | 1 |
25 | |
30 | |
200 | |
218 | |
360 | |
500 | |
900 | |
1000 | |
1024 | |
different on request | |
Output driver, TTL | |
Output level | RS-422, 5 VDC |
Load current | <= 50 mA |
Switching time | < 100 ns |
Sampling rate, TTL | 100 kHz |
Output driver, HTL | |
Output level | Push-Pull, supply voltage |
Load current | <= 30 mA |
Switching time | < 500 ns |
Sampling rate, HTL | 30 kHz |
Speed, electrically [1/min] | (f-Sampling/Imp.) * 60 1/min |
Type of parametrization | Factory setting |
Maximum Speed, mechanically | <= 6000 1/min |
Shaft load, axial/radial | Own mass |
Bearing life time | >= 3.9E+10 revolutions |
Bearing life time - Parameter | |
Speed | 3000 1/min |
Operating temperature | 60 °C |
Angular acceleration | <= 10E+4 rad/s² |
Moment of inertia, typically | 2.5E-6 kg m² |
Start-up torque, 20 °C | 2 Ncm |
Concentricity tolerance | ± 0.03 mm |
Mass, typically | 0.5 kg |
8 (029) 555-8-000 | |
8 (044) 555-8-000 | |
8 (017) 255-8-000 |