Nominal voltage | |
---|---|
Specific value | 24 VDC |
Limit values, min/max | 11/27 VDC |
Nominal current, typically | |
Specific value | 100 mA |
Condition | unloaded |
Supply | |
Optional | 5 VDC ± 5 % |
Signal form | Square |
Incremental signals, square | |
Channels | K1+, K2+ |
inverted Channels | K1-, K2-, optional |
Phase position, electrically | 90 ° |
Zero pulse, square | |
Channel (Channels) | K0+ |
inverted Channel | K0- optional |
Number of revolutions | 1x |
Length, electrically | 90 °, 180 °, 360 ° |
Impulses, square wave | 9000 |
10000 | |
18000 | |
Accuracy | ± 10" |
Interpolation, optional | 5-on-1 subdivision |
10-on-1 subdivision | |
25-on-1 subdivision | |
50-on-1 subdivision | |
Output driver, TTL | |
Output level | RS-422, 5 VDC |
Load current | <= 20 mA |
Output frequency | <= 1 MHz |
Output driver, HTL | |
Short-circuit proof | yes |
Output level | Push-Pull, supply voltage |
Load current | <= 20 mA |
Output frequency | <= 300 kHz |
Type of parametrization | Factory setting |
Maximum Speed, mechanically | <= 4000 1/min |
Shaft load, axial/radial | Own mass |
Concentricity tolerance | ± 0.05 mm |
Mass, typically | 1 kg |
8 (029) 555-8-000 | |
8 (044) 555-8-000 | |
8 (017) 255-8-000 |